manualshive.com logo in svg

Siemens 7ML1301-1, Инструкция по эксплуатации, Страница: 38 / 99

Поделиться
Скачать
Siemens 7ML1301-1 Скачать руководство пользователя страница 38

Page 34

SITRANS LG200 – INSTRUCTION MANUAL 

7ML19985KA02

Inst

allat

ion

3.

Align the probe process connection with the threaded or flanged mounting on the 

vessel. 

4.

For threaded connections, tighten the hex nut of the probe process connection. For 

flanged connections, tighten flange bolts. 

Probe can be shortened in the field: 

a.Loosen and remove the two cable clamps.
b.Slide the weight off of the probe.
c.Cut the cable to the required length plus 162 mm (6.38").
d.Slide the weight back on to the probe.
e.Reinstall the two cable clamps and tighten.
f.Enter the new probe length (inches or cm) in software. 

Installing the Transmitter

1.Remove the protective plastic cap from the 
top of the probe. Put the cap in a safe place 
in case the transmitter has to be removed 
later. 
2.Place the transmitter on the probe. Be 
careful not to bend or dirty the gold, high 
frequency (male) connector. 
3.Align the universal connection at the base 
of the transmitter housing with the top of the 
probe. Hand tighten the connection. 
4.Rotate the transmitter to face the most 
convenient direction for wiring, 
configuration, and viewing. 
5.When the transmitter is facing the desired 
direction, use a 38 mm (1½”) wrench to 
tighten the universal connection on the 
transmitter to 15 ft-lbs. A torque wrench is 
highly recommended. This is a critical 
connection. DO NOT LEAVE HAND TIGHT.

1. 

2.

3. 

4. 

5. 

enclosure 

Содержание 7ML1301-1




































































































Отзывы:

Нет отзывов