Siemens 7ME6810, Руководство по эксплуатации, Страница: 141 / 170

Parameter lists
F
Parameter lists
MAG 8000 is delivered with factory settings that are not stored as default values. Because
defaults values are not present in the meter, an automatic return to factory values is not
possible.
The default settings are available at Siemens Industry Online Support (
https://
support.industry.siemens.com/cs/products?dtp=Download&mfn=ps&pnid=17328&lc=en-US )
under the Flow Tool entry. The Flow Tool is required to be able to read the default settings file.
Visible display information is indicated in the table by menu and index number. Remember to
enable displayed menus in parameter 130.
The abbreviations used in the display menu table are: Operator menu = O, Meter menu = M,
Service menu = Se, Data Logger menu = L, Statistic menu = St, Revenue menu = R.
Factory settings marked in
italic cannot be edited.
Note
Change of units
If the unit and factor is changed, all unit-related values become invalid.
It is recommended to reset all unit-related values.
F.1 1-99
Param‐
eter ID
Meter
version Display
view Parameter/data type Factory settings Data range
Fixed parameter or meter data that are not changeable
1 All M1 Application identifier Identity Max. 15 characters.
Only numbers are visible in the
display (letters are shown as "_")
2 All - Application location Location Max. 16 characters
3 All M3 Module type MLFB dependent MAG 8000 Basic
MAG 8000 Advanced
MAG 8000 CT Basic
MAG 8000 CT Advanced
MAG 8000 Irrigation
4 All M4 Software version x.xx
5 All - Sensor size Sensor related Max. 12 characters.
DN 25 to 1200 (1" to 48")
6 All - Vendor name Siemens Siemens
SITRANS FM MAG 8000
Operating Instructions, 03/2020, A5E03071515-AH
141