Siemens 7ME6810, Руководство по эксплуатации, Страница: 127 / 170

Volume: m
3
, m
3
× 100, L × 100, Gallon, G × 100, G × 1000, MG, CF × 100, CF × 1000, AF, AI,
kl, ML, BBL42
Flow rate: m
3
/min, m
3
/h, m
3
/d, L/s, L/min, L/h, ML/d, GPS, GPM, GPH, GPD, MGD, CFS, CFM,
CFH, BBL42/s, BBL42/min, BBL42/h, BBL42/d
The MAG 8000 CT format for all regions is:
● m
3
for totalizer and m
3
/h for flow rate
To ensure selection of correct conversion factor, see unit conversion table in appendix.
All measurement units are printed on a label affixed to the display (except the European
version). Some meter sizes have a factor included to secure the 8 digit display value will not
overrun after short time of operation. Manual configuration of new units is allowed. A new
sticker showing the new settings must then be affixed to the display.
Protected parameters
The following parameters are protected (see also parameter lists in appendix):
MAG 8000 Standard / MAG 8000 CT MAG 8000 CT (additionally)
Parameter no. Parameter name Parameter no. Parameter name
- New password 100 Actual date and time
5 Sensor tube diameter 101 Totalizer 1
7 Meter No. 102 Totalizer 2
8 Totalizer unit 201 Alarm configuration list
9 Flow unit 206 Battery alarm limit
10 Qn (Q3) 303 Operation excitation frequency
300 Totalizer unit factor 305 Decimal point place
301 Flow unit factor 310 Flow direction totalizer 1
302 Pipe size 312 Flow direction totalizer 2
321 Calibration date 327 Adjustment factor
323 Calibration factor 328 Low flow cut-off
325 Sensor offset 332 Empty pipe impedance
Flow Tool
C.5 Unit selection
SITRANS FM MAG 8000
Operating Instructions, 03/2020, A5E03071515-AH
127