Siemens 7ME305, Руководство по эксплуатации, Страница: 111 / 124

Menu
code Device function,
Parameters Description Factory setting Setting options Read
or write
3.6.1 Total.net unit Physical volume unit or mass unit
Note: Whenever using mass flow the
actual density have to be selected in
menu 3.1.4 m³ l, hl, m³, Ml, ft³, Gal,
MGal, ImpGal, MIm‐
pGal, g, kg, Ton, lb Write
3.6.2 Lo Alarm Limit Value for lower alarm limit -1.000.000.000 m³ -1.000.000.000 o 0 Write
3.6.3 Hi Alarm Limit Value for upper alarm limit +1.000.000.000 m³ -0 to 1.000.000.000 Write
3.6.4 Hysteresis Hysteresis for the limits 0 0 to 3 Write
3.6.5 Settings net Volume totalizer reset to “0” and
“stop/start” No action No action
Reset + stop
Reset + start Write
D.1.4 Menu 4 - Device outputs
Menu
code Device function,
Parameters Description Factory setting Setting options Read
or write
4.1 PROFIBUS
4.1.1 Bus Address PROFIBUS address of device 126 0 to 126 Write
4.1.2 Ident-Nr Selection of profile-specific or manu‐
fact.-specific identification number
(GSD-files: manuf. 0x8159.gsd; pro‐
file 0x9741.gsd). Manuf. spec. Manuf. spec.
Profile spec. Write
4.1.3 min Tsdr Minimum station delay time of res‐
ponder (unit: bit time =32 μs = time
for 1 bit at 31.25 kbit/s). 11 bits Factory set (11 bits)
Read only Read
4.2 Digital output 1 Frequency or impulse signal for
flow or alarm signal
4.2.1 Function Assignment of output function Pulse Pulse
Frequency
Alarm
Flow dir. forward
Flow min
Flow max
Flow min/max
Total forw. max
Total rev. min
Total net. min
Total net max
No function Write
4.2.2 Signal type Configure output:
Signal: passive only
Logic: positive or negative Passive-pos. Passive-pos
Passive-neg Write
HMI menu structure
D.1 Menu items (FW Rev. 4.00.00)
SITRANS FUS060 with PROFIBUS PA
Operating Instructions, 09/2021, A5E02225054-AD
111