Siemens 7ME305 Скачать руководство пользователя страница 102 | Manualshive

Страница: 102 / 124

Siemens 7ME305 Скачать руководство пользователя страница 102

B.10

FW revision history

FW revision Date

Changes in FW

Changes in documentation

2.01.04

12.2005

First edition, PA profile version 2.00

New

2.01.07

01.2007

Signalling of update events in status byte

None

3.00.00

03.2014

Firmware update

Updated Operating Instruction

4.00.00

08.2015

Firmware & hardware update

Updated Operating Instruction

B.11

FW and GSD file compatibility

The PROFIBUS module provides backwards compatibility to earlier GSD files. This makes it
possible to replace a module containing an earlier firmware version with a module containing
the most recent firmware and still maintain compatibility to an already existing configuration
through GSD files of a class 1 master.

B.12

Features supported by GSD files

The following table shows the features supported when combining compatible GSD files and FW
versions of the PROFIBUS module.

GSD file

Compatible FW versions

Supported features

Si08159.gsd

2.01.04

DPV0 and DPV1

Si08159.gsd

2.01.07

DPV0 and DPV1

3.00.00

DPV0 and DPV1

Si028159.gsd

4.00.00

DPV0 and DPV1

PROFIBUS communication
B.12 Features supported by GSD files

SITRANS FUS060 with PROFIBUS PA

102

Operating Instructions, 09/2021, A5E02225054-AD

«
...
100
101
102
103
104
...
»

Содержание 7ME305





























































































































Отзывы:

Нет отзывов