Siemens 7KM1020-0BA01-1DA0 Скачать руководство пользователя страница 23

Страница: 23 / 94

PAC1020
Equipment Manual, 05/2020, L1V30610008B-01

Installation

Mounting location

The device is intended for installation in permanently installed panels within enclosed rooms.

WARNING

Only operate the device in a secure location.

Failure to heed this warning may cause death, serious personal injury, or equipment

damage.

The power monitoring device must always be operated in a lockable control cabinet or a

lockable room. Ensure that only qualified personnel have access to this cabinet or room.

Conductive panels and doors on control cabinets must be grounded. The doors of the control

cabinet must be connected to the control cabinet using a grounding cable.

Note
Mounting on DIN rails

If the optionally available adapters for DIN rail mounting are used, the power monitoring

device can also be mounted on DIN rails.
•

Adapter for mounting on DIN rails, display faces forwards (7KM9900-0XA00-0AA0)

•

Adapter for mounting on DIN rails, display faces towards DIN rail (7KM9900-0YA00-0AA0)

Mounting position

The device must be installed vertically.

Figure 3-1

Mounting position

Installation space and ventilation

Sufficient clearance must be maintained between the device and neighboring components in

order to comply with the permissible operating temperature. You can find dimension

specifications in chapter Dimensional drawings (Page 77).

Содержание 7KM1020-0BA01-1DA0































































































Результаты поиска

Содержание 7KM1020-0BA01-1DA0

Отзывы:

Siemens 7KM1020-0BA01-1DA0, Руководство пользователя, Страница: 23 / 94

Результаты поиска

Содержание 7KM1020-0BA01-1DA0

Отзывы: