Instructions for fitting connectors, attachments and devices
2.3 Electrical networks
Passive network components
20
System Manual, 02/2013, C79000-G8976-C282-01
7.
To strip the insulation, turn the tool
in the direction of the arrow
–
approx. 4 times for PVC
insulation
–
approx. 8 times for PUR
insulation
8.
Keeping the it closed, pull the
stripping tool with jacket and
remnants of the shield off the end of
the cable.
Note: If a core is damaged, the section
of cable must be cut off and stripped
again.
9.
Remove the cable jacket, shield
and the white filler with your hand.
10.
Spread out the cores according to
their colors on the contact holder of
the FC RJ-45 plug 180 4x2.
11.
Cut off the filler thread as close to
the shield braid as possible.
12.
Insert the wires into the contact
element of the FC RJ-45 plug 180 4
x 2 as far as the limit stop according
to the color markings.
13.
Press down the contact element as
far as the limit stop.
Notes: If the wires do not completely
fill the wire guide slits, the cable must
be stripped again.
If the wires extend beyond the wire
guide slits, the wires must be
shortened.
