background image

Instruction Sheet

408-10111

LOC B

1 of 4

E2007 Tyco Electronics Corporation, Harrisburg, PA

All International Rights Reserved

TE logo and Tyco Electronics are trademarks.

*Trademark. Other products, logos, and company names used are the property of their respective owners.

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.tycoelectronics.com

30 OCT 07 Rev B

Hydraulic Crimping Head 1901820-1

MPORTANT SAFETY INFORMATION

Содержание 1901820-1

Страница 1: ...ther products logos and company names used are the property of their respective owners TOOLING ASSISTANCE CENTER 1 800 722 1111 PRODUCT INFORMATION 1 800 522 6752 This controlled document is subject to change For latest revision and Regional Customer Service visit our website at www tycoelectronics com 30 OCT 07 Rev B Hydraulic Crimping Head 1901820 1 MPORTANT SAFETY INFORMATION ...

Страница 2: ...die and a quick disconnect coupling cylinder half which mates with the coupling on the hose to release or supply pressure A dust cap covers the quick disconnect coupling 3 INSTALLATION 3 1 Head Installation Prior to installing the head ensure that the pump and hose being used are working properly and are adjusted to and rated at 10 000 psi An incorrectly adjusted or rated pump hose could result in...

Страница 3: ...ce a year or every 7 500 cycles whichever comes first the hydraulic head should be returned to Tyco Electronics for magnetic particle inspection Additionally inspect and service the head as described in Figure 3 every month or 1 000 cycles whichever comes first Refer to Figure 1 5 1 Cleaning Remove accumulations of dirt and grease on the crimping head especially in areas where dies are installed a...

Страница 4: ...ylinder it should normally turn on and off freely when moderate pressure is applied with applied with a wrench For oil leaks and a sticky coupling tighten or replace the coupling Quick Disconnect Coupling The coupling mates hard or won t mate or release or it leaks oil or it sticks at the hose connection Replace coupling Inspect the ram in the Power ON ram advanced position for evidence of galling...

Отзывы: