Siemens 3RK1308-0 00-0CP0 Series, Руководство по эксплуатации оборудования, Страница: 107 / 218

Functions
6.11 Inputs
Motor starter (3RK1308‑0**00‑0CP0)
Equipment Manual, 11/2019, A5E34821005002A/RS-AC/003
107
Table 6- 8 Input n action
Input
n action
Input n level Input n signal Operating
mode
Description
No action NO/NC n. ret./ret. All No direct action on the motor starter. Evaluation
und further processing possible using the
process image.
Trip without restart NO/NC n. ret. All
• Results in tripping of the motor.
•
Must be acknowledged once the cause of
the tripping has been rectified (initial status).
Trip with restart
(AUTO RESET)
NO/NC n. ret. All
•
Results in tripping of the motor.
• Acknowledged automatically after the cause
of the trip has been rectified (initial status).
Trip end position
CW
NO/NC n. ret. All
•
The motor is switched off regardless of the
direction of rotation.
• A fault is generated and reported.
•
The motor can only be switched on with
"Motor CCW"
Trip end position
CCW
NO/NC n. ret. All
•
The motor is switched off regardless of the
direction of rotation.
• A fault is generated and reported.
•
The motor can only be switched on with
"Motor CW"
Group warning NO/NC n. ret./ret. All
• The diagnosis "Group warning" is output.
•
The motor starter is not switched off.
Emergency start NO n. ret. All
•
Starts the load when an ON command is
issued despite the fact that an internal trip
command is present.
• Intrinsic device protection of the motor
starter remains active and prevents the
device from being destroyed.
•
Only allowed as a NO contact
• Not parameterizable when the "EX motor"
parameter is active.