Main
Settings in BIOS Setup
POST Error Halt - Aborting system startup
defines whether the system startup is to be aborted and the system halted when an
error is detected.
Halt On All Errors
If the self-test detects an error, system startup is aborted after the
self-test, and the system is halted (default entry).
No Halt On Any Errors
The system startup is not aborted. The error is ignored as far as
possible.
Quick Boot
can reduce the extent of the self-test and thus accelerate the system startup.
Enabled
When the PC is switched on, the quick self-test is carried out, in
which the floppy disk drives are not checked.
Disabled
When the PC is switched on, the complete PC configuration is
tested (default entry).
Type of monitor - Video Display
This field is used to specify the type of monitor connected.
EGA/VGA, Color 80, Monochrome
default entry:
EGA/VGA
Base Memory
This field indicates the size of the available base memory below 1 Mbyte.
Extended Memory
This field indicates the size of the memory above 1 Mbyte.
A26361-D858-Z120-6-7619
15
Settings in BIOS Setup Advanced
Making advanced system settings - Advanced
menu
!
Change the default settings only for special applications. Incorrect settings
can cause malfunctions.
You can make the following system settings in the
Advanced
menu:
– Internal cache and second-level cache (in the
Cache Memory
submenu)
– Copy BIOS sections to the RAM (in the
Shadow Memory
submenu)
– Interfaces and controllers (in the
Peripheral Configuration
submenu)
– Timers for PCI slots (in the
PCI Configuration
submenu)
– Data access to hard disk (in the
Advanced System Configuration
submenu)
– Plug&Play functionality (in the
Plug and Play O/S
field)
– Configuration data (in the
Reset Configuration Data
field)
– Hard disk access (in the
Large Disk Access Mode
field)
Phoenix BIOS Setup Copyright 1985-94 Phoenix Technologies Ltd.
Main
Advanced
Security Power Exit
Item Specific Help
Warning! –––––––––––––––––––––––
Setting items on this menu to incorrect values
may cause your system to malfunction.
Cache Memory
Shadow Memory
Peripheral Configuration
PCI Configuration
Advanced System Configuration
Plug & Play O/S: [No]
Reset Configuration Data: [No]
Large Disk Access Mode: [DOS]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Execute Command F7 Previous Values
Example for the
Advanced
menu
16
A26361-D858-Z120-6-7619
