background image

 

 

  PX845EV1 

Series

 

 

 

Copyright 

All rights are reserved. No part of this publication may be reproduced, transmitted, 

transcribed, stored in a retrieval system or translated into any language or computer language, 
in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or 
otherwise, without the prior written permission of the company. Brands and product names 
are trademarks or registered trademarks of their respective companies. 

The vendor makes no representations or warranties with respect to the contents herein and 

especially disclaim any implied warranties of merchantability or fitness for any purpose. 
Further the vendor reserves the right to revise this publication and to make changes to the 
contents herein without obligation to notify any party beforehand. Duplication of this 
publication, in part or in whole, is not allowed without first obtaining the vendor’s approval 
in writing. 

 

Disclaimer 

We make no warranty of any kind with regard to the content of this user’s manual. The 

content is subject to change without notice and we will not be responsible for any mistakes 
found in this user’s manual. All the brand and product names are trademarks of their 
respective companies. 

 

FCC Compliance Statement 

This equipment has been tested and found to comply with the limits of a Class B digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at his own 
expense. However, there is no guarantee that interference will not occur in a particular 
installation. 

120410045M2N

Содержание PX845EV1 Series

























































Отзывы: