PX845EV1/ PX845EV1 PRO
42
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.”
Options: Delay 4 Sec, Instant-Off (default).
Wake Up Control
If you highlight the “Wake Up Control” label and then press the enter key, it will display a
submenu with the following options:
PCI PME Wake Up
When you select “Enabled”, a PME signal from any PCI 2.2 card will awaken the system.
And if you want to awake from onboard LAN that you can enable this item, too.
Options: Disabled (default)
、
Enabled
RTC Wake Up
When “Enabled”, you can set the date and time at which the RTC (real-time clock) alarm
awakens the system from Suspend mode.
Options: Enabled
、
Disabled (default).
Date of Month Alarm
You can choose which date of the month the system will boot up. This field is only
configurable when “RTC Wake Up” is set to “Enabled”.
Time (hh: mm: ss) Alarm
You can choose the hour, minute and second the system will boot up. This field is only
configurable when “RTC Wake Up” is set to “Enabled”.
USB KB Wake-up From S3
This item allows you to awaken the system from suspend mode using a USB keyboard.
Options: Enabled
、
Disabled (default)
* This option is active when the ACPI Suspend Type is set to S3.
Ring Wake Up
This option allows you to awaken the system upon receiving an incoming call to modem
device. Options: Disabled (default)
、
Enabled.
Reload Global Timer Events
When a system goes into suspend mode, certain devices must be inactive for a period of
time. Conversely, if any of those devices have any activity, the system will awaken. You can
select the devices that will participate in suspend/power-on activity by configuring these
fields. Devices include: Primary IDE 0/ Primary IDE 1/ Secondary IDE 0/ Secondary IDE 1/
FDD,COM,LPT Port/ PCI PIRQ [A-D]#. Options: Disabled (default), Enabled
