Siel SOLEIL 3F-TL10K, Инструкция по установке и эксплуатации

Страница: 102 / 277

IV351 Rev04
Date Issue 2015-04-21
Page 102 di 277 + FR
3.5 Introduction of Graphic Data Logger
To show the information of Inverter, there is a graphic Data Logger in the unit. This Data
Logger can show various information of the Inverter such as operational status and warning
message, its button allow user to operate for display control or system characteristic setting
„
Graphic Data Logger Configuration
The following table indicates the main specification of the Data Logger:
LCD Monochrome
Displayed
Information Each I/P power, O/P power, Operation mode and warning
message
Storage Period 5 years
Storage Media 2GB SD card (support up to 32GB)
Data Download Via B type USB
„
Features of Graphic Data Logger
Multicolored back light
The backlight of the LCD will be changed according to its status. There are 3 colors of
backlight and their indications are:
z
Green: Start-up and normal status
z
Red:
Fault Status. In this status, Inverter disconnected from grid due to system fault
or Inverter failure. These faults and failures are defined in “error message table” later
on.
z
Yellow:
Warning Status. Inverter disconnected from grid due to system fault within
the past 48 hours, but Inverter reconnected.
Data download
User can download and access logger data with a PC via B type USB cable and manage internal data.
Please refer to the chapter 11, download the data from the graphic logger.