Siel SOLEIL 3F-TL10K, Инструкция по установке и эксплуатации

Страница: 106 / 277

IV351 Rev04
Date Issue 2015-04-21
Page 106 di 277 + FR
5.2 Before Installation
To obtain optimal performance, please consider following guidelines before installation:
)
Check the ambient temperature of installation is within specified range -20 ~ +60
q
C.
)
The grid voltage and frequency at installed site must be within the specific range defined
by applicable regulation type.
)
Electric utility company has approved the grid connection.
)
Only qualified personnel are performing the installation and maintenance.
)
Adequate convection space surrounds the Inverter.
)
Inverter is being installed away from explosive vapor or dust.
)
No flammable object is near the Inverter.
)
No mounting on wooden flammable surface.
Installation Location :
SIEL grid-tied PV inverter can be installed and operated at locations where the
ambient temperature is up to 60
q
C. However, for optimal operation, it is
recommended that Inverter is installed where the ambient temperature is between 0
to 45
q
C.
Warning:
Do not expose the PV inverter to direct sunlight. Direct sunlight increases the
internal temperature that may reduce conversion efficiency.
Note :
Although the Inverter is designed for outdoor application (IP65), still, we
recommend not exposing the Inverter to severe moist or wet environment.
Suggestion before mounting:
SIEL grid-tied PV inverter may weigh up to around 57kg (
§
125.7 lbs). To avoid
injury and for safety purpose, be sure to use proper lifting techniques and secure for
the help of someone to assist in the unpacking and installation of the Inverter.
Public Utility only:
SIEL grid-tied PV inverter is equipped with a RCMU (Residual Current
Monitoring Unit) device which is used for protection of direct or indirect contact
with this product under any condition.