SIEB & MEYER FC2, Руководство пользователя

Страница: 63 / 73

Code Error message Error reaction Possible reason
▶
The heartbeat bit was not
toggled in time.
E11
(0x10B)
Communication / bus system error The motor is stopped immediately
and disabled.
▶ The communication line is
defect or disturbed.
▶ The control source failed.
▶ The heartbeat bit was not
toggled in time.
E12
(0x10C)
Mains 'Ready for operation' is
missing
The motor is stopped immediately
and disabled.
▶ At least one mains phase is
lost.
E17
(0x311)
FPGA power output stage shut‐
down
Motor is stopped immediately. ▶ Overload in power supply unit
E18
(0x312)
Error in spindle selection Converter will not be switched on. ▶ X32 is not connected.
▶ No spindle selected by the
CNC.
E26
(0x31A)
Motor temperature too high The motor is stopped immediately
and disabled.
▶ The motor became too hot.
▶ The motor is overloaded.
▶ The cooling is insufficient.
▶ The motor temperature sensor
is defect or disturbed.
E27
(0x31B)
Ambient temperature too high The motor is stopped immediately
and disabled.
▶ The temperature in the switch
cabinet is too high.
▶ The ventilation of the
frequency converter is insuffi‐
cient.
▶ The fan is defect.
E28
(0x31C)
Power output stage temperature
too high
The motor is stopped immediately
and disabled.
▶ The temperature in the switch
cabinet is too high.
▶ The output stage is over‐
loaded.
▶ The ventilation of the
frequency converter is insuffi‐
cient.
▶ The fan is defect.
E29
(0x31D)
Motor load too high (Motor I²t) The motor is stopped immediately
and disabled.
▶ The motor is overloaded.
▶ The motor was operated too
long above the rated current.
▶ The setting for the motor para‐
meters is wrong.
▶ The motor is defective.
E30
(0x31E)
Power output stage load too high
(I²t)
The motor is stopped immediately
and disabled.
▶ The frequency converter is
overloaded.
▶ The frequency converter was
operated too long above the
rated current.
▶ The power output of the
frequency converter is too
small for the application.
▶ The setting for the motor para‐
meters is wrong.
E33
(0x521)
Power supply load monitoring ->
mains voltage too high
The motor is disabled immediately.
The power supply is cut immedi‐
ately from the mains.
▶ The parameter setting of the
power supply is wrong.
▶ The mains voltage was too
high.
E34
(0x522)
Power supply load monitoring ->
mains voltage too low
The motor is disabled immediately.
The power supply is cut immedi‐
ately from the mains.
▶ The parameter setting of the
power supply is wrong.
▶ The mains voltage was too
low.
E35
(0x523)
Error in external power supply unit The motor is disabled immediately. ▶ The external power supply did
not acknowledge “Ready for
W
Status Display and Error Messages
FC2 - Frequency converter 02192100xy 63
11