SIEB & MEYER FC2 Скачать руководство пользователя страница 14

Страница: 14 / 73

DANGER

Risk of serious damage to property and personal injury may occur:

▶

when covers are removed illegally,

▶

due to improper use,

▶

when either the installation or the operation is incorrect

Observe the corresponding notes and information in the product documentation of

your device.

WARNING

Risk of injuries and material damage due to illegal modifications

Only change the settings of the device after having contacted SIEB & MEYER.

All Information and advice attached to the device, such as safety instructions or danger

warnings and technical data (type plate) are:

▶

not to be removed

▶

not to be damaged

▶

to be kept readably (no covers, no paint over or the like)

3.3

Appropriate Use

Use the device according to its appropriate use only. Consider the corresponding infor‐

mation regarding the application fields of the device in the product documentation.

The device is intended for use within an enclosed cabinet by the OEM or end user to

comply with pollution degree 2 or equivalent environmental conditions. That means:

Ensure to avoid conductive impurities and humidity during the operation.

SIEB & MEYER products are not suitable for use in areas exposed to explosion

hazards (ATEX zones) without approriate housing.

Terms according to DIN EN 61800

Before initial operation, make sure that the machine will not expose danger (e.g.

runaway moves). The conformity with the safety standards DIN EN 60204-1 and DIN

EN 61800-5-1 must be ensured.

The manufacturer of the system or the machine has to meet the requirements of the

legal values regarding the Electromagnetic Compatibility (EMC). SIEB & MEYER units

can be operated in industrial areas, provided that the attached EMC information has

been taken into consideration.

SIEB & MEYER tests all products in its own EMC laboratory to ensure that the prod‐

ucts meet the respective standards, when they are installed properly.

Installation of the device differing from the product documentation and the manual

"EMC Guidelines" means that the machine manufacturer has to carry out new meas‐

urements to comply with the regulations.

SIEB & MEYER devices meet the requirements of the Low-Voltage Directive

2014/35/EU. The harmonized standards of DIN EN 50178 and DIN EN 60204-1 in

Safety Instructions

FC2 - Frequency converter 02192100xy

Содержание FC2










































































Результаты поиска

Содержание FC2

Отзывы:

Похожие инструкции для FC2

Бренды по названию

Популярные бренды

SIEB & MEYER FC2, Руководство пользователя

Результаты поиска

Содержание FC2

Отзывы:

Похожие инструкции для FC2

Бренды по названию

Популярные бренды