SIEB & MEYER FC2, Руководство пользователя

Страница: 32 / 73

Connector Meaning Pin assignment
X31B Feedback Speed sensor and motor temperature sensor of spindles 9–12
(option)
page 42
X32 Spl.Sel.In Inputs for spindle selection page 44
X33 Spl.Sel. Out Outputs for spindle selection page 45
X34 Mains supply page 46
X35 Motor output page 46
X64 OUT EtherCAT slave output page 46
X65 IN EtherCAT slave input
You can order the suitable connector kit for the FC2 drive at SIEB & MEYER
under article number 32299551.
8.1 ID Switch
➮ Set the address for the module by means of the address selection switch.
16 adresses are available: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F.
(When the device is connected via SERVOLINK 4 only 12 addresses are available
(0 to B).)
The addresses of several devices in a system must be different from each
other to ensure that they can be identified by the software.
8.2 X1, X2 – 24V
4-pole Combicon connector suitable for mating connector MVSTBW 2.5/ 4-ST
(Phoenix)
X1 Name Meaning X2
Mating connector Pin I/O I/O Pin Mating connector
4 I 24 V Logic voltage 18 to 28 volts I 1
3 I/O 0 V Logic supply 0 V I/O 2
2 A ERR0 Error code 0 of power supply unit A 3
1 A ERR1 Error code 1 of power supply unit A 4
Specification of terminal connections
▶ Conductor cross-section solid/stranded: 1 to 2.5 mm²
▶ Tightening torque: 0.5 to 0.6 Nm
Related topics
Connection example: "X1, X2 – 24 V", page 49
Connectors
W
32 FC2 - Frequency converter 02192100xy
8