SICK V200 Скачать руководство пользователя страница 50

Страница: 50 / 64

Chapter

Operating Instructions

V200/V300

8012227/YT87/2016-03-29

Subject to change without notice

Fault diagnosis

This chapter describes how to identify and rectify errors and malfunctions during the
operation of the safety camera system.

10.1 In the event of faults or errors

Cease operation if the cause of the malfunction has not been clearly identified!

⋅

Stop the machine if you cannot clearly identify or allocate the error and if you cannot
safely rectify the malfunction.

The system state “lock-out”

In case of certain faults or an erroneous configuration, the system can go into the
“lock-out” state. The status LED

∪

flashes with a short duty cycle

⌠ϑ

(short on/long off).

To place the device back in operation:

⋅

Rectify the cause of the fault following the information given in this chapter.

⋅

Switch the power supply for the V200/V300 off and on again (e.g. by unplugging the
system plug and reinserting it).

10.2 SICK support

⋅

If you cannot rectify an error with the help of the information provided in this chapter,
please contact your local SICK representative.



WARNING

Содержание V200

































































Результаты поиска

Содержание V200

Отзывы:

Бренды по названию

Популярные бренды

SICK V200, Руководство по эксплуатации

Результаты поиска

Содержание V200

Отзывы:

Бренды по названию

Популярные бренды