ON
OFF
1
2
3
HOLD
1
Measured value
2
Output hold value (average hold value)
3
Interval in which an analysis is carried out.
Setting hold function
To use the hold function, set
IN function
Hold
.
>
IN Input
>
>
IN Function
>
>
Hold
>
Set a hold function via the
IN Hold function
parameter.
>
IN Input
>
>
IN Function
>
>
IN Hold function
>
> Select option >
Parameter
Value
Factory settings
IN Hold function
Measured value
Peak value
Lowest value
Peak-to-peak value
Auto peak value
Auto lowest value
Average value
Normal
Measured value
7.4.5.3
IN Debouncing
When debouncing is activated, the input signal must be constantly present at the
IN Input for 100 ms. The timing tolerances of the external teach functions take into
account activation and deactivation of the debounce function. It is not necessary to
adjust the timings.
Setting debouncing
>
IN Input
>
>
IN Debouncing
>
> Select option >
Parameter
Value
Factory setting
IN Debouncing
No
Yes
Yes
7.4.5.4
IN Input logic
The behavior of the input can be selected as normally open contact (High-active, factory
setting) or normally closed contact (Low-active).
Setting input logic
>
IN Input
>
>
IN Input logic
>
> Select option >
7
OPERATION
44
O P E R A T I N G I N S T R U C T I O N S | OD2000
8026231//2021-11-17 | SICK
Subject to change without notice
