18
8013741/16LH/V1-7/2020-04| SICK
O P E R A T I N G I N S T R U C T I O N S | MCS300P Ex
Subject to change without notice
2
PRODUCT DESCRIPTION
2.4
Method of operation
Operating states
The actual operating state is displayed on the operator panel and output via status signals.
Error messages are shown on the display and recorded in a logbook (SOPAS ET).
Sequence control programs
Various sequence control programs can be started via the operator panel.
Typical sequence control programs (depending on parameter settings) are:
●
Adjustment with test medium
●
Adjustment with internal adjustment standard (optical filter, option)
2.5
Interfaces
●
Analog and digital interfaces (depending on equipment).
●
Ethernet (depending on individual version)
2.6
SOPAS ET (PC program)
SOPAS ET can be used to set the MCS300P Ex parameters and provides access to the
MCS300P Ex logbook.
SOPAS ET runs on an external PC connected to the MCS300P Ex via the Ethernet interface.
For more information concerning the operating states,
see “Status and classification”,
For the parameterized sequence control programs, see the System Documentation
provided.