3
Product description
3.1
Scope of delivery
The delivery of the device includes the following components:
Table 2: Scope of delivery
No. of
units
Component
Note
1
Device in the version ordered
InspectorP62x device types:
•
V2D621P-xxxxBxxS51 (single-deep)
•
V2D621P-xxxxFxxS51 (double-deep)
InspectorP63x device types:
•
V2D631P-xxIxCxxS50 (single-deep)
•
V2D631P-xxWxExxS50 (double-deep)
2
Sliding nut with 5.5 mm-deep
M5 threaded mounting hole
Positioned in the slot on the right side of the device.
Alternative mounting option for the device instead
of tapped blind hole. Use in pairs.
1
Hex key SW2
1)
For manual actuation of the focus screw
4
Label (round, self-adhesive)
1)
Protects the focus setting when using an S-mount
lens. The image sharpness is adjusted using the
manual focus screw. Apply the adhesive label over
the access opening for the focus screw on the top
of the device.
1
Printed safety notes, multilin‐
gual
Brief information and general safety notes
1)
Valid for device type V2D631P only.
With special variants, where optional extras have been ordered, or owing to the latest
technical changes, the actual scope of delivery may vary from the features and illustra‐
tions shown here.
3.2
Function and use
Temperature-, load- and steel construction-dependent influencing factors result in vary‐
ing geometric conditions at transfer points in storage and conveyor systems. These con‐
ditions make safe automated positioning of automated storage and retrieval systems
more difficult when storing and retrieving load carriers.
Figure 1: Negative influencing factors during automated positioning processes
InspectorP Rack Fine Positioning supports the precise positioning of automated storage
and retrieval systems used for storing and retrieving load carriers.
PRODUCT DESCRIPTION
3
8024534/1DQ8/2022-01-14 | SICK
O P E R A T I N G I N S T R U C T I O N S | InspectorP Rack Fine Positioning
9
Subject to change without notice
