SICK ICR 84x, Руководство по эксплуатации

Страница: 93 / 182

Operating instructions Chapter 6
ICR 84x Image Code Reader
Operation
8 010 961/0000/10-05-2005
©
SICK AG · Division Auto Ident · Germany · All rights reserved
6-39
6.5.4 Displaying and editing operating data
This function enables statistical operating data, which the ICR maintains in the form of
counters during the reading procedure, to be displayed and reset.
The ICR does not output a reading result in this mode.
1. Click in the toolbar.
The ICR cancels Reading mode. The “Device Ready“ LED is extinguished.
The O
PERATING
D
ATA
dialog box appears ( Fig. 6-29 ).
2. After checking/resetting the desired counters, click “OK“ to confirm any changes made.
The ICR returns to Reading mode. The “Device Ready“ LED lights up.
6.5.5 Reading diagnosis
Function of the auxiliary interface . In this mode, the ICR outputs the data contents of all
read codes with the accompanying reading diagnosis data via the auxiliary interface. Codes
which are considered incomplete according to the evaluation criteria, and which are
therefore incorrect, are output as well. The number of codes output can, therefore, be higher
than the number of those that were sent via the host interface in the reading result. In the
default setting, this mode is selected for the auxiliary interface.
Fig. 6-23, Page 6-30 and
Fig. 6-25, Page 6-32 shows the relevant output format of the auxiliary interface for 2-D
codes and bar codes.
The data communication of the auxiliary interface can also be routed via the Ethernet
interface. The physical auxiliary interface (RS 232) will then become disabled. See
Chapter 5.5.6 “Connecting the Ethernet interface“, Page 5-10 .
In the default setting, the ICR does not output any reading diagnosis data via the host
interface.
If the reading diagnosis is to remain inactive, this can be set via the A
UXILIARY
I
NTERFACE
tab.
Fig. 6-29: CLV Setup: “Operating Data“ dialog box