SICK ICR 84x, Руководство по эксплуатации

Страница: 26 / 182

Chapter 3 Operating instructions
ICR 84x Image Code Reader
3-8
©
SICK AG · Division Auto Ident · Germany · All rights reserved 8 010 961/0000/10-05-2005
Product description
3.3 Indicators and control elements
3.3.1 Control elements
The ICR is operated and configured as described above. A variety of parameter options
allow you to adapt the device to a wide range of applications.
The following can be defined:
•
The configuration of the code types to be read
•
The reading, evaluation and output characteristics
•
The communication parameters of the host interface, CAN or Ethernet interface
•
The structure of the data output string for “Good Read“ and “No Read“ (host interface)
•
The function of the auxiliary interface
Chapter 10.3 “Installation and operating instructions for the PC-based “CLV Setup“
program“, Page 10-3 describes the procedure for installing the “CLV Setup“ program and
explains how to use it. Configuration (parameterizing) is explained in Chapter 6.3.2
“Configuring the ICR for the application with the Setup Assistant“, Page 6-4 .
3.3.2 Function of the LEDs
General LEDs
Four LEDs indicate the operating status, activity of the laser diode, the reading result status
and data transfer on the host interface. The LEDs ( Fig. 3-4 ) are located on the rear of the
device toward the bottom. Table 3-2, Page 3-9 shows the meaning of the LEDs in the
different operating modes/functions.
Fig. 3-4: LEDs