97
8012426/YWL2/3-0/2016-08| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100
Subject to change without notice
SPECIFICATIONS
7
7
Specifications
7.1
Compliances
The technical design of this device complies with the following EU directives and EN
standards:
●
EU Directive: LVD (Low Voltage Directive)
●
EU Directive: EMC (Electromagnetic Compatibility)
Applied EN standards:
●
EN 61010-1, Safety requirements for electrical equipment for measurement, control
and laboratory use
●
EN 61326, Electrical equipment for measurement technology, control technology and
laboratory use - EMC requirements
●
EN 14181, Stationary source emissions - Quality assurance of automated measuring
systems
Electrical protection
●
Insulation: Protection class 1 according to EN 61010-1.
●
Insulation coordination: Measuring category II according to EN 61010-1.
●
Contamination: The device operates safely in an environment up to degree of contami-
nation 2 according to EN 61010-1 (usual, not conductive contamination and temporary
conductivity by occasional moisture condensation).
●
Electrical energy: The wiring system to the power supply voltage of the system must be
installed and fused according to the relevant regulations.
Approvals
DUSTHUNTER SP100 is performance-tested according to EN 15267 and may be used for
continuous emission monitoring in plants requiring approval and plants according to EU
Directives.
