Sices RN200, Руководство пользователя

Страница: 11 / 35

RN200 user manual 9
The upper status bar contains navigation, time and/or some status information.
From left it contains:
•
The current mode identifier ("M" in the example ").
•
The current page identifier, in the selected mode ("05" in the example ").
•
A title ("POWERS" in the example) that briefly describes the content of the page. The
title is translated into the language selected by the operator.
The mode identifier, together with the page identifier ("M.05" in the example) allows to refer
unambiguously to a page.
The title can be replaced with information relating to the status of the system. You can do it in
three ways:
•
By holding down the ESC/SHIFT button. The title will be shown again when you
release the button.
•
With a double click of the ESC/SHIFT button. The title will be shown again when
selecting a new page or a new display mode.
•
By activating bit 6 of parameter P.0495. If there are status messages that contain a
waiting time (countdown), the controller always displays these messages instead of
the title; in case of page change (user manual navigation), the title of the new page
LEGEND:
1
– Status bar
2
– Data area
1
2
M.05 POWERS _
T
0
kW
1.00
i
L1
0
kW
1.00
i
L2
0
kW
1.00
i
L3
0
kW
1.00
i