e005 OLIMPO
ver. 00
User’s manual
pag. 24 di 29
Printed in
e005-di OLIMPO (eng).doc
Siap+Micros S.r.l.
1.1 Environmental conditions of use
This apparatus has been made to be used in accordance with the specifications indicated in the following
table:
USE FORESEEN AND
THE LIMITS OF THE APPARATUS
DATA/INFORMATION AVAILABLE
Use foreseen
The use foreseen includes exclusively the measuring of the
physics
and
chemical
parameters
for
meteorology,
agrometeorolgy,
hydrometry,
environmental
and
climatic
monitoring, remote control and automation of water supplies ,water
purifiers, sewage, etc. checking and automation systems of logical
distribution, special applications to keep landslides under control,
microbiological processes,chemical etc.
Wrong use reasonably foreseen and
warnings of use
It is wrong to use this apparatus for domestic of hobby purposes;
the use by unqualified Staff and /or unsuitably trained.
Environment use
This apparatus should not be used in an area where gas or
explosive vapors, corrosive or inflammables are present.
Possible serious environmental factors
The environmental conditions for a correct use are:
-
Reference temperature: 20°C
-
Temperature of use: -30°C +60°C
-
Relative maximum humidity allowed: 100% not condensed
-
Storage temperature: -30°C +70°C
-
Storage humidity: 90%
Requested
special
training
or
experience for operative staff
The staff should be suitably qualified, trained and aware of the risk
factors involved.
The foreseen "durability " of the
apparatus
and/or
any
of
its
components, taking into the use
foreseen
The peripheral stations and its components used, are of sturdy,
resistant design. All of the components can be replaced and/or
repaired, a limited period of use has not been considered.
However, specific maintenance interventions have been planned,
and any eventual part replacement at preset intervals due to a
normal deterioration or breakage of some parts or components of
the apparatus.
Space limits
The peripheral stations do not have any mobile parts, therefore,
the eventual fencing of the area is not necessary to guard against
the safety of people. It may be requested by the client in order to
avoid any tampering.
The installation of the peripheral station will be carried out directly
by the producing firm. The client must provide, at the moment of
purchase, in order to install, the precise point of electricity and a
suitable area which meets all of the requirements
