SHOWTEC 44510, Руководство пользователя

Страница: 31 / 36

30
Order code: 44510
Pixel Controller
Troubleshooting
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out following steps.
No Light
If the Pixel Controller does not operate properly, refer servicing to a technician.
Suspect four potential problem areas as: the power supply, the fuse, the controller and the Pixelstrip.
01)
Power supply. Check that the unit is plugged into an appropriate power supply.
02) The fuse. Replace the fuse. See page 29 for replacing the fuse.
03) The controller. Return the controller to your Showtec dealer.
04) The Pixelstrip. Return the device to your Showtec dealer.
05) If all of the above appears to be O.K., plug the unit in again.
06) If you are unable to determine the cause of the problem, do not open the controller, as this may
damage the unit and the warranty will become void.
07) Return the device to your Showtec dealer.