SHOWTEC 44510, Руководство пользователя

Страница: 30 / 36

29
Order code: 44510
Pixel Controller
Channel 9 – Blue LED 3, Pixelstrip # 1
0–255
Gradual adjustment Blue, from dark to brightest
  
  
  
Channel 1918 – Red LED 40, Pixelstrip # 16
0–255
Gradual adjustment Red, from dark to brightest
Channel 1919 – Green LED 40, Pixelstrip # 16
0–255
Gradual adjustment Green, from dark to brightest
Channel 1920 – Blue LED 40, Pixelstrip # 16
0–255
Gradual adjustment Blue, from dark to brightest
Maintenance
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
01)
All screws used for installing the device or parts of the device have to be tightly connected and
must not be corroded.
02) There may not be any deformations on housings, fixations and installation spots.
03) The electric power supply cables must not show any damages or material fatigue.
The Pixel Controller requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the housing with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the DMX connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Replacing the Fuse
Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the
fuse burns out, the product will not function whatsoever. If this happens,
follow the directions below.
01) Unplug the unit from electric power source .
02) Insert a screwdriver into the slot in the fuse cover. Turn the fuse holder counterclockwise. The fuse will
come out .
03) Remove the used fuse. If brown or unclear, it is burned out .
04) Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse holder. Be sure
to
use a fuse of the same type and specification. See the product specification label for details.