SHOWTEC 44510, Руководство пользователя

Страница: 25 / 36

24
Order code: 44510
Pixel Controller
Advanced Settings
01) While in main menu, press the UP/DOWN buttons to select .
02) Press the ENTER button to open the menu. The display will show:
03)
Press the UP/DOWN buttons to select one of the 7 options:
●
SIGNAL HOLD
● PIXEL REVERSE
● SCREEN TIMEOUT
● SCREEN BRIGHTNESS
● SOFTWARE VERSION (V2.4)
● INVERT DISPLAY
● FACTORY RESET
04)
Press the ENTER button to open the desired option.
05) Press the UP/DOWN buttons to change settings.
06) Press the ENTER button to confirm your choice.
1. Signal Hold
In this menu you can determine the behavior of the Pixel Controller in case of a DMX failure.
01)
Press the UP/DOWN buttons to select one of the 2 options:
●
BLACK: If DMX signal is lost, the device will black its output out.
● HOLD: If DMX signal is lost, the device will use the last successfully received DMX signal and will
continue using it until DMX signal reception is restored, in order to ensure undisrupted
performance.
02)
Press the ENTER button to confirm your choice.
2. Pixel Reverse
In this menu you can set the pixel direction.
01)
Press the UP/DOWN buttons to select one of the 2 options:
●
ON: Pixel direction reverse is enabled.
● OFF: Pixel direction reverse is disabled.
02)
Press the ENTER button to confirm your choice.
3. Screen Timeout
In this menu you can set the amount of time after which the display will turn off, when no button is
pressed.
01)
Press the UP/DOWN buttons to select one of the 3 options: 30 seconds/60 seconds/NEVER.
02) Press the ENTER button to confirm your choice.