SHOWTEC 44510, Руководство пользователя

Страница: 17 / 36

16
Order code: 44510
Pixel Controller
The Pixel Controller can be operated with controller or without controller in stand-alone mode.
Control Panel
A) OLED display
B) UP button
C) DOWN button
D) ENTER button
E) MENU button
Fig. 09
DMX Addressing
The control panel on the top side of the controller allows you to assign the fixture a DMX address, which is
the first channel with which the Pixel Controller will respond to a DMX controller.
When using multiple Pixel Controllers, make sure you set the DMX addresses right.
Without pixel control, the device has 8 channels. Therefore, the DMX address of the first Pixel Controller
should be 1 (001); the DMX address of the second Pixel Controller should be 1+8=9 (009); the DMX
address of the third Pixel Controller should be 9+8=17 (017), etc.
Make sure that you do not have any overlapping channels in order to control each Pixel Controller
correctly. If two or more Pixel Controllers are addressed similarly, they will work similarly.
Note: If you want to connect multiple devices and operate them in full pixel mode (480-channel mode),
you need to use Art-Net/Kling-Net. See Art-Net Settings on page 13 for more information.
Controlling:
After having addressed all Controller fixtures, you may now start operating these via your light controller.
Note: After switching on, the Pixel Controller does not automatically detect whether DMX-512 data is
received or not. You will need to switch manually to DMX control. For more information see 1. DMX on
page 21.
Note: It is necessary to insert an XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
Display Off after 60 seconds
When no button is pressed for 60 seconds, the display will turn off.
To light up the display, you have to press the MENU, ENTER, UP or DOWN button.
Once you have pressed the button, the display will light up.