SHOWTEC 44510, Руководство пользователя

Страница: 13 / 36

12
Order code: 44510
Pixel Controller
Multiple Pixel Controllers (Art-Net/Kling-Net Control)
01)
Fasten the controller to a firm trussing or place it on a flat surface. Leave at least 0,5 meter on all
sides for air circulation.
02) Always use a safety cable (order code 70140 / 70141).
03) Connect the Pixelstrips.
04) Use a CAT-5/CAT-6 cable to connect the controllers.
04) Connect your computer with installed Art-Net software to the first device’s RJ45 "in" socket.
05) Link the units as shown in Fig. 07. Connect the first unit's RJ45 "out" socket with the second unit's "in"
socket, using a CAT-5/CAT-6 cable. Repeat this process to link the rest of the units.
06) Supply electric power: Plug electric mains power cords into each unit's power IN socket, then plug
the other end of the mains power cord into proper electric power supply sockets, starting with the
first unit. Do not supply power before the whole system is set up and connected properly.
Fig. 07
Note: Link all cables before connecting electric power