SHOWTEC 30751, Руководство пользователя

Страница: 5 / 24

4
Ordercode: 30751
Sunstrip Active MKII 110V
● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
● For adult use only. The device must be installed beyond the reach of children. Never leave the unit
running unattended.
● Never attempt to bypass the thermostatic switch or fuses.
● For replacement use fuses of same type and rating only.
● The user is responsible for correct positioning and operating of the device. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
● This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
● During the initial start-up, some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
● Allow time to cool down, before replacing lamp.
● For replacement use lamps of same type and rating only.
● Repairs, servicing and electric connection must be carried out by a qualified technician.
● WARRANTY: Till one year after date of purchase.
Operating Determinations
● This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
● The minimum distance between light output and the illuminated surface must be bigger than 1
meter. (T
his distance may differ depending on the model. The exact minimum distance will be
mentioned in the corresponding manual.)
● To eliminate wear and improve lifespan, during periods of non-use, completely disconnect from
power via breaker or by unplugging.
● The maximum ambient temperature t
a
= 40°C must never be exceeded.
● The relative humidity must not exceed 50 % with an ambient temperature of 40°C.
● If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
● Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
● If the Sunstrip Active is lowered from the ceiling or high joists, professional trussing systems have to be
used.
● Use a clamp to mount the Sunstrip Active with the mounting bracket, to the trussing system.
● The Sunstrip Active must never be fixed swinging freely in the room.
● The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
● When rigging, derigging or servicing the Sunstrip Active, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.