SHOWTEC 30751, Руководство пользователя

Страница: 18 / 24

17
Ordercode: 30751
Sunstrip Active MKII 110V
10 DMX channels
Channel 1 – Dimmer intensity LED 1
0-255
Gradual adjustment, from dark to brightest 0-100%
Channel 2 – Dimmer intensity LED 2
0-255
Gradual adjustment, from dark to brightest 0-100%
Channel 3 – Dimmer intensity LED 3
0-255
Gradual adjustment, from dark to brightest 0-100%
Channel 4 – Dimmer intensity LED 4
0-255
Gradual adjustment, from dark to brightest 0-100%
Channel 5 – Dimmer intensity LED 5
0-255
Gradual adjustment, from dark to brightest 0-100%
Channel 6 – Dimmer intensity LED 6
0-255
Gradual adjustment, from dark to brightest 0-100%
Channel 7 – Dimmer intensity LED 7
0-255
Gradual adjustment, from dark to brightest 0-100%
Channel 8 – Dimmer intensity LED 8
0-255
Gradual adjustment, from dark to brightest 0-100%
Channel 9 – Dimmer intensity LED 9
0-255
Gradual adjustment, from dark to brightest 0-100%
Channel 10 – Dimmer intensity LED 10
0-255
Gradual adjustment, from dark to brightest 0-100%
Maintenance
The Sunstrip Active MKII 110V requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and
a soft cloth. Do not use alcohol or solvents.
The front lens will require weekly cleaning, as smoke-fluid tends to build up residues, reducing the light-
output very quickly.
Keep connections clean. Disconnect electric power, and then wipe the DMX connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
01)
All screws used for installing the device or parts of the device have to be tightly connected and
must not be corroded.
02) There may not be any deformations on housings, fixations and installation spots.
03) Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
04) The electric power supply cables must not show any damages or material fatigue.