SHOWTEC 30751, Руководство пользователя

Страница: 10 / 24

9
Ordercode: 30751
Sunstrip Active MKII 110V
Installing the Lamp
The Showtec Sunstrip Active MKII 110V uses a 110V/50W GU10 bulb (Ordercode: SPHK498) as
manufactured by all popular manufacturers. Use only the appropriate lamp for your unit.
Note that, product versions that use other lamps, may be offered in the future. Check your product
specification label for information.
Always disconnect from electric mains power supply before changing lamps.
The lamp has to be replaced when it is damaged or deformed due to the heat.
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the
device was not designed for.
Damages caused by non-observance are not subject to warranty.
Procedure
01)
Loosen the 4 screws on the front of the housing.
02) Gently remove the metal housing (Fig. 05).
03) Read lamp instructions. Do not touch the lamp bulb glass.
04) Push and turn the lamp counter clockwise and remove the lamp (Fig. 06).
05) Oil on hands shortens the lamp life. (If you touch the bulb glass, wipe off the glass with a clean, lint-
free towel and rubbing alcohol).
06) Insert the lap pins into the small holes in the lamp socket.
Push and turn clockwise to install the lamp (Fig. 07).
07) Put the metal housing back and fasten the screws snugly (Fig. 08).
Fig.05 Fig.06
Fig.07 Fig.08