Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
www.shorestation.com
0004160
Page
24
of
25
Rev
B
10/7/2010
To mount the bunk you will need to slide a 3/8-16 X 4 & 7/16 X 3 square u-bolt over the front and rear
platform assemblies from the outside in. Place the bolts an equal distance from the center of the
platform in both directions, place an adjustable bunk bracket over the bolts and secure with a lock
washer and a hex nut. Repeat this process until all four brackets are mounted. Set the bunk assembly
on top of the brackets and insert a 3/8 X 1 hex bolt thru the bracket on the bunk and then thru the hole
on the top of the adjustable bracket and secure on the inside of the adjustable with a flange lock nut.
Repeat on the other brackets and tighten only enough to maintain their flat position as they will need to
move slightly to conform to the bottom of the PWC.
