Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
www.shorestation.com
0004160
Page
23
of
25
Rev
B
10/7/2010
With the winch in place it is now time to start attaching cables. The cable from the front and rear
platform assembly will come out the bottom of the tube and go thru the lower platform next to the winch
post and corner post secured with a 1/2" flat washer and 2 brass hex nuts. The cable from the platform
side assembly that comes out the bottom will go thru the second hole from the winch post and will have
a washer and 2 brass hex nuts. The cables that comes out the top of the platform tube assemblies will
go up thru the bracket or bracket and brace tube an will be secured on top with a 1/2” flat washer and a
1/2” brass hex nut.
