Shop fox W1845, Руководство пользователя

Страница: 28 / 48

-26-
Model W1845 (For Machines Mfd. Since 6/17)
O
PE
R
ATIO
NS
Spindle.Table.Height
The spindle table on the oscillating edge sander can
be moved vertically to accommodate various sanding
operations and to decrease spot wear on the sanding
drums.
To.adjust.spindle.table.height , do these steps :
1.
Loosen adjustment lock handle shown in
Figure.22
.
2. Raise or lower spindle table to desired height.
3. Tighten adjustment lock handle.
Spindle.Sanding
The spindle sander on the Model W1845 produces a high-
quality sanding finish on inside contours.
4. When you have completed your sanding operation,
turn sander OFF
.
To perform spindle sanding operations, do these steps:
1. Make sure that appropriate spindle and table inserts
have been installed correctly and that both are
secured tightly (see Page 20).
2. Position table in desired location and turn sander
ON
.
3.
While securely holding the workpiece, lightly press it
against the spindle and maintain consistent pressure
against table, as shown in
Figure.23
. Use extra
caution when sanding end-grain.
KEEP. HANDS. CLEAR. of.
all. pinch. points. when.
adjusting. the. spindle.
table.
Figure.22. Spindle table adjustment lock
handle.
Figure 23 . Spindle sanding.
Do. not. use. the. spindle. sanding.
attachment. without. the. spindle. table.
properly.installed.and.the.correct.table.
insert.for.the.drum.in.place..Failure.to.
do. so. could. result. in. serious. personal.
injury.