Shop fox W1845, Руководство пользователя

Страница: 27 / 48

-25-
Model W1845 (For Machines Mfd. Since 6/17)
O
PE
R
ATIO
NS
Miter.Gauge
The miter gauge needs to be adjusted perpendicular to
the face of the belt when it is mounted in the table slot.
To.adjust.the.miter.gauge,.do.these.steps:
1. DISCONNECT MACHINE FROM POWER!
2. Use a machinist's square with one edge against face
of miter gauge and the other against belt face, as
shown in
Figure 21.
3. Loosen lock knob on miter gauge (see Figure 21
) to
adjust it flush with edge of the square.
4. Tighten lock knob, and verify the setting.
Note: Sometimes the tightening procedure can
affect adjustment.
5. Loosen the screw that secures the angle pointer, and
adjust pointer to the 0˚ mark on scale.
6. Retighten screw that secures the angle pointer.
Figure 21 . Squaring miter gauge to belt.
Machinist's
Square
Lock Knob