Shining 3D AccuFab-D1s, Руководство пользователя

Страница: 2 / 26

Foreword
General
The user manual (hereinafter referred to as "the manual") introduces the functions,
installation, operation and maintenance of the AccuFab-D1s printer (hereinafter
referred to as "the printer").
AccuWare is the data preparation software for AccuFab printers.
Fab Cure is the curing unit for AccuFab printers
FabWare is the operating software for AccuFab printers.
Please use original consumables and spare parts. Any change to the printer
without the manufacturer's permission will result in printer failure and will
invalidate warranty.
General
Foreword
Safety Instructions
Additional information
Improper actions or conditions that may damage the product or result in personal
injuries, and consequently void your warranty or service contract or lose the data.
Revision History
1 V3.3.10
No. Version Revision Content Release Date
December, 2021
Update network connection features.
Update FabWare snapshots and features.
FCC Regulations
Please note that changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
RF exposure statement
This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.