Shindaiwa DGM60MK, Руководство пользователя

Страница: 43 / 48

40
Clean and inspect the inside of the spill containment.
(Refer to section “10. Inspection/Maintenance (9) Spill Containment
Cleaning/Inspection”.)
Remove the starter key and store in a secure location.
Clean all generator components, and store in a dry and dust-free location. Also cover
when storing so that rain cannot enter through the suction or exhaust ports.
< NOTE >
Adjust the fluid of the removed battery to the appropriate level and recharge approximately every
month.
(2) Double-Stacking Procedures
WARNING : INJURY
Always be sure to observe the following items when double stacking this generator in
a warehouse or similar location.
Check that the hood of this generator is not dented,
and that bolts are not loose or missing.
Set in a location with a flat hard floor capable of
withstanding the double-stacking weight.
Always be sure to use lifting hooks when suspending
this generator.
Insert wood ties of the same size and that are wider
than this generator between each generator, and set
another generator on top of the ties.
Never stack more than two levels, and do not set a
generator on top that is larger in weight/size than that
on the bottom.
Do not operate the generator when it is double
stacked.
12. Troubleshooting
WARNING : ELECTRIC SHOCK/INJURY
Do not touch output terminals or internal electric parts while the generator is
operating.
Do not open the check door during operation. Be careful of pinching or
catching of moving parts such as the cooling fan and fan belt.
Always be sure to stop the engine and remove the engine key when
performing inspection or maintenance.
CAUTION : FIRE
Never allow flame to come close to the generator.
CAUTION : BURNS
Do not touch the engine and muffler after stopping the engine as they are still
hot.
5
4
6