Shindaiwa DGM60MK, Руководство пользователя

Страница: 15 / 48

12
(3) Fuel Meter
Displays the amount of fuel in the internal fuel tank. When the tank is full, all lamps are lit up
and FULL is displayed. The amount of lamps lit up decreases as the amount of fuel
decreases as it approaches EMPTY. Add fuel immediately when only one lamp is displayed.
The fuel meter on the control panel will only display the fuel level for the internal fuel tank.
Generator Meters and Gauges
(1) Voltmeter
The voltmeter displays the three-phase output
voltage (voltage between L1-L3). Check that
240 V is displayed during operation. Output
voltage for single-phase three-wire (voltage
between U-W) is the same voltage as the three-phase output voltage (voltage between
L1-L3). Accordingly, use the voltage meter displayed value as a reference.
* Check that 480 V is displayed during operation if using at the three-phase 480-V setting.
The voltage of single-phase three-wire output of “U-W Voltage” is a value that is one half of
the displayed voltage meter value.
(2) Ammeter
Displays the output current (phase current) of the generator. Turn the ammeter selector
switch to “L1+U” to display the output current of the three-phase L1 phase and single-phase
U phase. Turn the switch to “L3+W” to display the output current of the three-phase L3
phase and single-phase W phase. “L2” displays the output current of three-phase output
terminal L2.
< NOTE >
If measuring the output current for a single-phase three-wire type, turn the ammeter selector
switch to “L1+U” or “L3+W”. The voltage cannot be accurately measured if set to “L2”.
(3) Frequency Meter
Displays the frequency of the power source. Check that 60 Hz is displayed during operation.
Indicators
(1) Pre-heating Indicator
The pre-heating indicator lights up when the starter switch is at
PREHEAT. The pre-heating indicator turns off when
pre-heating is completed to indicate that it is possible to start
the generator.
< NOTE >
Pre-heating time depends on the coolant temperature, and
should be completed in approximately 0.5 to 15 sec.
(2) Pilot Lamp
This lights up when the engine is operating to indicate that
power is being generated.
Pilot Lamp
Pre-Heating Indicator