13
WARNING!
Before operating, make sure
the blade is securely mounted.
Turn the blade with your hand
slightly and make sure the
blade turns smoothly without
wobbling.
Make sure the direction of the
arrow indicated on the blade
corresponds with the arrow
indicated on the safety guard.
Hex Wrench
Plug Wrench
Hex Wrench
Figure 13
Installation of the
Trimmer Head
CAUTION!
Never use this machine without
sub guard when using a trimmer
head.
IMPORTANT!
The bolt, bolt guard, and safety clip
are not used with a trimmer head
cutting attachment. Save these parts
for future blade installation.
1. Make sure the switch is turned off
and the engine is stopped.
2. Turn the unit over so the gearshaft
from the gearcase faces up.
3. Remove the bolt, bolt guard,
holder and the safety clip from the
output shaft.
4. Attach holder onto the gear shaft.
Gearshaft
Holder A
Holder
5. Rotate Holder A until the hole
in Holder A aligns with the hole
in the gearcase. Using the hex
wrench, lock the gearcase as
shown.
Figure 14
