20
GENERAL SAFETY INSTRUCTIONS
NEVER operate the unit with
the Safety Guard and/or other
protection devices removed!
ALWAYS make sure the cutting
attachment is properly installed
and firmly tightened before
operation.
NEVER use a cracked or
warped cutting attachment.
ALWAYS make sure the
cutting attachment fits properly
into the appropriate cutter
holder. If a properly installed
attachment vibrates, replace
the attachment with a new one
and re-check.
ALWAYS stop the engine
immediately and check
for damage if you strike
a foreign object or if the
cutting attachment becomes
entangled.
NEVER cut with dull blades.
Use a blade that is sharp and
in good condition.
NEVER operate a machine
with loose, worn, damaged,
or missing fasteners or
cutting attachment holders.
Improper maintenance, use of
nonconforming replacement
components, or the removal of
safety devices could result in
serious injury.
When transporting, make sure
the engine is not running and
the blade is covered with the
blade cover.
NEVER run the engine
indoors! Make sure there
is always good ventilation.
Fumes from engine exhaust
can cause serious injury or
death.
NEVER allow the engine to run
at high speeds without a load.
Over-revving without a load
could damage the engine.
WARNING!
