8
Assembly of the Outer Tube
1. Using the hex wrench, loosen the
joint bolt.
Figure 4
IMPORTANT!
The terms “left,” “left-hand,” and
“LH”; “right,” “right-hand,” and “RH”;
“front” and “rear” refer to directions
as viewed by the operator during
normal operation of this product.
2. Slip the outer tube into the joint
until the tube bottoms. The outer
tube or gearcase shaft may have to
be rotated slightly for the splines
on the mainshaft to fully engage to
the engine.
3. Tighten the joint bolt securely
using the hex wrench.
Outer Tube Assembly
Fan Cover Housing
Engine Assembly
T2510
Mainshaft Tank Guard
Figure 5
Outer Tube Assembly
Fan Cover Housing
Engine Assembly
C2510
Mainshaft Tank Guard
Figure 5A
Insert Label
