RB-473-C02G
43
3)
Select the file storing the adjustment data and click Start.
The message 'Writing EEPROM' appears on the bottom of the screen of SLM-5000 / SLM-4000. When this
message disappears with a long buzzer, sending data completes.
If this message disappears with beep tones and 'Error!' appears on Hyper Terminal, the file may be corrupted.
Check the file name and repeat the procedure from 11.5 1).
Cut the power of SLM-5000, and turn it on again.
Note
Before communication
Use the cable with appropriate specification.
Match the setting of communication parameters between a PC and SLM-5000 / SLM-4000.
During communication
Pay attention not to accidentally cut the power of a PC or SLM-5000 / SLM-4000.
Connect the cable firmly.
Start sending
If SLM-5000 / SLM-4000 stops...
Cut the power and repeat the procedure from 3. Preparation.
