RB-473-C02G
17
6. Troubleshooting
Error message
Status
Description
Measure Error
Abnormality of measurement value when the power is turned
on.
Paper Empty*
No papers in the printer
Printer Cover Open*
The printer cover is open.
Printer Heat Over*
Abnormal temperature rise on the printer head
EEPROM Fault
DRAM Error
Device
abnormality
Memory malfunction
SPH Over
The measurement result exceeds the measurement range of
SPH.
CYL Over
The measurement result exceeds the measurement range of
CYL.
Prism Over
The measurement result exceeds the measurement range of
prism.
ADD Over
Measurement
abnormality
The measurement result exceeds the measurement range of
ADD.
Retry Error
Unmeasurable due to dust, flaws or unnecessary light.
No target error
Image
processing
abnormality
The light-receiving sensor fails to receive the measurement
light.
note:* SLM-5000 Only
Message
Status
Description
Measure Error
When the power is turned, values are not initialized
(values are not zero (0)).
Paper Empty
（
SLM-5000 Only
）
No papers are set in the printer.
Printer Cover Open
（
SLM-5000 Only
）
The printer cover is open.
Printer Heat Over
（
SLM-5000 Only
）
The printer is overheated.
EEPROM Fault
Abnormality of memory
Sensor Error
Abnormality of camera sensor
Error * * * (100
–
141)
Abnormality
of the
instrument
Abnormality of electronic parts (on the 'Control circuit board'
)
SPH Over
SPH value exceeds the measurement range.
CYL Over
CYL value exceeds the measurement range.
Prism Over
Prism value exceeds the measurement range.
ADD Over
Measurement
abnormality
ADD value exceeds the measurement range.
Retry Error
Measurement fails because of dust, flaws, unnecessary light,
and so on.
Notarget Error
Abnormality
of image
processing
The measurement light does not enter into the receiving light
sensor.
Display with a three-digit code (number).
【
SLM-5000: To SN/Y74763N
】
【
SLM-4000: To SN/Y74040A
】
【
SLM-5000: From SN/Z74764N
】
【
SLM-4000: From SN/Z74041A
】
