RB-473-C02G
12
5.8. Marking ASSY
【
Cartridge specification
】
1)
Affix the positioning tape for the marking
ASSY on the marking arm. Refer to Figure
1 on the right for the tape position to be
affixed.
2)
Lower the lens holder. (See Figure 2)
Rotate the marking ASSY until two screws N
become visible. Remove the screws.
3)
Mount the new marking ASSY and tighten the
screws N aligning with the positioning tape.
【
Inkwell specification
】
1)
Rotate the marking ASSY. Affix the positioning
tape for the marking ASSY on the marking arm.
Refer to Figure 3 on the right for the tape
position to be affixed.
2)
Lower the lens holder. Remove two screws N.
(See Figure 4)
3)
Mount the new marking ASSY and tighten the
screws N aligning with the positioning tape.
Figure 1
Marking ASSY
Positioning tape
Marking arm
Align the tape
with this position.
Figure 2
Rotate
Screw N (2):
M3
L10 (black)
Lens holder
Figure 4
Marking ASSY
Positioning tape
Figure 3
Marking arm
Align the tape
with this position
Rotate
Lens holder
Screw N (2):
M3
L10 (black)
