４ INSTALLATION AND MAINTENANCE/INSPECTION
ＭＵＸ-１００ SERVICE MANUAL
４ - ４
Fig. 4-3 How to Move Down the MUX
Next remove the packing wood support.
First , cut the fixing tape (between wood support and packing materials) , then remove the packing materials.
After that , remove the screws (one side 6 screws) from wood support , then remove one side of wood support.
Fig. 4-4 How to Remove the packing materials
Slope pallet
Hold the handle, then pull the
handle to let the system move
backward and down from the
pallet.
Set to ON (by turning
clockwise) the key
switch here.
Set to ON (upper position)
the main breaker here.
×
Remove these screws
then remove this side
of wood support.
CUT!!
Remove this
packing materials
