Shimadzu GCMS-QP2010 Series, Руководство по обслуживанию, Страница: 133 / 168

200-33168 Seal Teflon As required Consumable
036-15550-12 Oring,AS568A-012 4D As required Consumable
225-09344 Sample vacuum bottle As required Consumable
225-04209 cap As required Consumable
225-10627-91 DI PROBE ASSY As required Consumable
DI
225-10618-91 REPELLER2,CI+(C) IN DI mode ,CI analysis As required Consumable
225-09493-03 STANDARD SAMPLE (PFTBA) 5g As required Consumable
STANDAR
DSAMPLE 225-09493-01
STANDARD SAMPLE (TRIAZINE) 0.5g As required Consumable
Consumable VACUM
SYSTEM
017-30163-11 ROTARY PUMP OIL ULTRAGRADE15 1L 0.28L per oil replacement 1L/year (#5)
Consumable
085-35124-03 SCOTCHBRITE (for finishing electrodes) set of 20 sheets 20 sheets/year
225-10194-91 JIG, IS Service part
225-01453-94 COLUMN MOUNTING JIG (I/F)
Tools and
jigs
225-01453-95 COLUMN MOUNTING JIG (INJ)
#1 Replace after approximately 80 injections.
#2 If carrier gas leaks or when glass insert is replaced.
#3
Replace periodically, normally once every 6 months. However, replace more frequently under
certain measurement conditions or after many analyses of samples with a high boiling-point or
samples that are solid at room temperature.
(See GC System User Guide for details.)
#4 Use when column is replaced.
#5 Ideally, replace oil once every three months (3000 hours operating time). Insufficient vacuum can cause various problems in the
mass spectrometer system. The oil must be replaced appropriately.