Shimadzu AP W Series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 169

background image

3

Read the instruction manual thoroughly before using the product.

Thank you for purchasing the Shimadzu Analytical Balance AP Series.

This instruction manual provides details on how to use the balance and on the accessories and options,
etc., that are related to it. Read the manual thoroughly and make sure it is used in accordance with the
details listed herein. The following instruction manual is also supplied with this product.

Simple Sheet: Operation Guide 321-78385 Operation descriptions in a simple diagram format.

Store the instruction manuals together with the product in an easily-accessible location.

The instruction manuals (PDF format) can also be downloaded from the Shimadzu website (https://www.
shimadzu.com/an/products/balances/analytical-balances/ap-series/index.html).

Balances shimadzu

SEARCH

Click

Notices

• If the balance is to be operated by a different user or transferred to a different location, make sure the instruction

manuals are also provided to the subsequent users.

• Safety precautions are listed in the instruction manual to ensure safe usage. Read the section on [Safety

Precautions] thoroughly prior to using the balance.

Notices

• The content of this manual is subject, without notice, to modifications for the sake of improvement.
• Every effort has been made to ensure that the content of this manual was correct at the time

of creation. However, in the event that any mistakes or omissions are discovered, it may not be
possible to correct them immediately.

• The copyright of this manual is owned by Shimadzu Corporation. Reproduction and duplication of

whole or part of the content without permission of the company are strictly prohibited.

• Windows is the registered trademark of Microsoft Corporation of the U.S.A. in the United States

and other countries. All other company names and product names that appear in this manual are
trademarks or registered trademarks of the companies concerned. Note that ™ and ® indications
are not used.

• UniBloc and Smart+ are the registered trademarks of Shimadzu Corporation in Japan.
• Shimadzu does not guarantee that the serial communication functions will operate without problem

on all PCs. Shimadzu will not accept responsibility for any trouble that arises as a result of using this
function. It is recommended that all important data and programs are backed up in advance.

• Shimadzu does not guarantee the operations all USB memories, USB hubs, USB keyboards or

USB Bar code reader that can be connected to the USB port.

© 2017-2021 Shimadzu Corporation. All rights reserved.

Foreword

Foreword

«
1
2
3
4
5
...
»

Содержание AP W Series










































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AP W Series

Бренд: H&S Страницы: 42

Бренд: Pahlen Страницы: 20

Бренд: Paia Страницы: 7

Бренд: Saadat Страницы: 61

Бренд: Saadat Страницы: 22

Бренд: L-Acoustics Страницы: 5

Бренд: Furuno Страницы: 20

Бренд: OttLite Страницы: 2

Rotor-Gene Q MDx CE

Бренд: Qiagen Страницы: 208

Бренд: Microsport Страницы: 7

Бренд: W&H Страницы: 46

EPL-FL1524-LED-100

Бренд: Larson Electronics Страницы: 3

Бренд: Sabo Страницы: 80

Бренд: Formosa Wireless Systems Страницы: 55

Бренд: Ralph Lauren Страницы: 2

sepro ROBOTIQUE

Бренд: Axess Страницы: 44

RSM-WSB(RED)-AS

Бренд: Hochiki Страницы: 2

Бренд: YOKOGAWA Страницы: 282

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды